|
|
06-19-2014, 07:21 PM
|
#1
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Slideout Awning
I just noticed that the awning on the front driver side slideout on my 05 Essex has separated. Is this an easy fix or the whole mechanism needs replacement? I would welcome any thoughts and/or suggestions.
Happy camping to all!!
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-19-2014, 07:44 PM
|
#2
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Slideout Awning
I just noticed that the awning on the front driver side slideout on my 05 Essex has separated. Is this an easy fix or the whole mechanism needs replacement? I would welcome any thoughts and/or suggestions.
Happy camping to all!!
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
06-19-2014, 08:57 PM
|
#3
|
Senior Member
Join Date: Aug 2013
Location: Canton, MI
Posts: 1,004
|
Slide out topper
I just replaced both toppers on my 2004 Dutchstar. You just need to replace the fabric not the hardware. Got my fabric from a independent place in Indiana, was around $300.00 for both toppers which was a heavier fabric than original. Would be helpful to have another person for the install.
__________________
Tigerfan1
2016 DSDP 4369, Freightliner Chassis, AF One brake system, 2016 Chevy Equinox
|
|
|
06-19-2014, 09:20 PM
|
#4
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Quote:
Originally Posted by Tigerfan1
I just replaced both toppers on my 2004 Dutchstar. You just need to replace the fabric not the hardware. Got my fabric from a independent place in Indiana, was around $300.00 for both toppers which was a heavier fabric than original. Would be helpful to have another person for the install.
|
Thanks, Tigerfan1. Did you have to take the mechanism off the motorhome?
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
06-20-2014, 05:17 AM
|
#5
|
Senior Member
Join Date: Nov 2011
Posts: 146
|
Just had both toppers on our motorhome done this spring and no the hardware did not come off of the coach. The topper edges slide into a grove on both the slideout and coach hardware. You do need help to feed the material and guide it evenly thru the tracks.
__________________
G & K Marshall
2004 DSDP 3810-2010 Ford Edge
|
|
|
06-20-2014, 06:25 AM
|
#6
|
Senior Member
Newmar Owners Club
Join Date: Jun 2013
Location: MidWest
Posts: 1,062
|
Quote:
Originally Posted by srh
I just noticed that the awning on the front driver side slideout on my 05 Essex has separated. Is this an easy fix or the whole mechanism needs replacement? I would welcome any thoughts and/or suggestions.
Happy camping to all!!
|
Separated... Could you provide a little more description of what occurred?
__________________
Ken & Anita[FONT=Lucida Console] 2011 Newmar Essex,4522,Cummins 500 ISM,2013 CRV,RVI2 Brake with TPMS
|
|
|
06-20-2014, 11:16 AM
|
#7
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Thanks
Quote:
Originally Posted by gmarsha2
Just had both toppers on our motorhome done this spring and no the hardware did not come off of the coach. The topper edges slide into a grove on both the slideout and coach hardware. You do need help to feed the material and guide it evenly thru the tracks.
|
gmarsha2: I appreciate the feedback. Would you care sharing what type of material and where you purchased it?
Kind regards,
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
06-20-2014, 11:24 AM
|
#8
|
Senior Member
Join Date: Aug 2013
Location: Canton, MI
Posts: 1,004
|
Slide out awning
No need to remove the mechanism but will need to line up holes on the end of the awning tube and put a bolt or cotter pin in to prevent the spring mechanism from unwinding when you remove the fabric. Good luck.
__________________
Tigerfan1
2016 DSDP 4369, Freightliner Chassis, AF One brake system, 2016 Chevy Equinox
|
|
|
06-20-2014, 11:38 AM
|
#9
|
Member
Join Date: Jul 2005
Location: Mesa, AZ
Posts: 60
|
Unfortunately I cannot recall where I purchased my slide out awnings when we replaced them however I was able to remove the old ones and install the new fabric with the help of my wife. It wasn't too hard and really didn't take that much time to do so. Whomever I purchased them from included complete instructions on how to do so. I have also been told that in many cases they have quite a bit of extra material on the roll and some have been able to reverse them rather than have to replace them.
__________________
2003 Fleeetwood Southwind 35R, Mesa, AZ
|
|
|
06-20-2014, 01:49 PM
|
#10
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Quote:
Originally Posted by kschoon1
Unfortunately I cannot recall where I purchased my slide out awnings when we replaced them however I was able to remove the old ones and install the new fabric with the help of my wife. It wasn't too hard and really didn't take that much time to do so. Whomever I purchased them from included complete instructions on how to do so. I have also been told that in many cases they have quite a bit of extra material on the roll and some have been able to reverse them rather than have to replace them.
|
Thank you very much! This is helpful to know.
Regards,
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
06-20-2014, 09:55 PM
|
#11
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
If the vinyl has separated from the fabric in center the it can be removed until you get it replaced.
Here is a thread on replacement.
One of the many links found in QT's 1 & 2.
|
|
|
06-21-2014, 05:41 AM
|
#12
|
Senior Member
Join Date: Nov 2011
Posts: 146
|
We found our material in Mercedes Texas at the Donna Flea Market. There are several vendors that cater to RV needs and were very good. We also did a change in color from white to black which pleased the DW. Hopes this helps....
__________________
G & K Marshall
2004 DSDP 3810-2010 Ford Edge
|
|
|
06-21-2014, 07:24 AM
|
#13
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Quote:
Originally Posted by gmarsha2
We found our material in Mercedes Texas at the Donna Flea Market. There are several vendors that cater to RV needs and were very good. We also did a change in color from white to black which pleased the DW. Hopes this helps....
|
Thanks!
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
06-21-2014, 07:25 AM
|
#14
|
Senior Member
Newmar Owners Club
Join Date: Feb 2012
Posts: 1,519
|
Quote:
Originally Posted by 007";2103797]If the vinyl has separated from the fabric in center the it can be removed until you get it replaced.
Here is a [B][URL="http://www.irv2.com/forums/f84/video-showig-how-to-replace-the-fabric-on-a-and-e-slidetoppers-131847.html#post1258879
thread on replacement.[/URL][/B]
One of the many links found in QT's 1 & 2.
|
That is very helpful! Thank you very much.
__________________
2008 Newmar Dutch Star 4304
2005 HR Navigator 45PBQ - SOLD
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|