Havin problems with the trim on the side of coach. It is coming apart from the coach . I have a 2019 Vennta 4348. This is happening on the driver side and have lost the end cap on piece.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
We have not as bad as this the problem with the molding coming loss. We are on a 6K mile trip and from our really bad roads I think most of this damage to our molding is coming from. Have done some repairs with super glue or JB weld and touch up paint. Might go around the coach and see if you can attach better before it gets as bad as yours.
Newmar Man
__________________
Tom/Teri 16031 NKK 117995 FMCA
18 London Aire 4531 Spartan K-3 605
97-04 LA 04-18 Essex 2018 London Aire
I would take it back to the Mothership & have them fix it. They will probably fix it @ N/C. Some Sikadur Super Bond will hold it on tight if you can get it worked under there- thin putty knife or a thin strip of metal. I would put a piece of duct tape over that exposed end to keep it from drawing wind in during driving if it were mine.
I would take it back to the Mothership & have them fix it. They will probably fix it @ N/C. Some Sikadur Super Bond will hold it on tight if you can get it worked under there- thin putty knife or a thin strip of metal. I would put a piece of duct tape over that exposed end to keep it from drawing wind in during driving if it were mine.
Linear Mode
