Valid Dash is Not Recognizing Valor TPMS
I have a '19 Newmar MADP on a Spartan chassis with a Valid dash. I installed Valor TPMS and I cannot get the display to recognize the TPMS, it remains grayed out on the dash display. When I use the Valor CANBUS display it works fine. All that is required to switch displays is the connector from the Newmar cable or the Valor cable at the transceiver. Does the dash need to be reprogrammed?
The Newmar cable connects to 12V, the RV-C bus, and the Valor transceiver. The Valor cable connects to 12V, the Valor CANBUS display, and the Valor transceiver.