Community Forums

Olroache · 02-10-2018, 11:29 PM

Hello

1. The water pump is not functioning. No water, No sound.

2. The Holding Tank display is not powering on. All other displays on the panel are working.

Note: Both share the same 10a fuse which was found blown. Replaced but no change. In line fuse at water pump is good.

Thanks in advance for any ideas

2009 DADP 4031

WA Larry · 02-11-2018, 12:46 AM

Are you sure they share the same fuse? Are the other fuses good? After you changed the 10A fuse, did the panel work properly? Do you have/can you use... a test light or multi-meter and start checking the circuit? Do you have voltage at the pump? If not, work your way back, at pump, at inline fuse out, inline fuse in, pump side of switch, supply side of switch, at fuse panel-both sides of the fuse, back and back.

Good luck.

Olroache · 02-11-2018, 12:20 PM

Quote:

Originally Posted by WA Larry

Are you sure they share the same fuse? Are the other fuses good? After you changed the 10A fuse, did the panel work properly? Do you have/can you use... a test light or multi-meter and start checking the circuit? Do you have voltage at the pump? If not, work your way back, at pump, at inline fuse out, inline fuse in, pump side of switch, supply side of switch, at fuse panel-both sides of the fuse, back and back.

Good luck.

It is marked as such. All of the fuses are very clearly and neatly marked. The rest were good. I was unable to find a suitable ground to use a test lamp (tried hinges, window frame, shower door frame, etc). After changing fuse neither worked. I will try the other items you mentioned. Thank you!