Community Forums

mjvalliere · 03-01-2022, 08:00 AM

Hello All,
Back again with more issues. I believe my ignition switch is faulty. Symptoms are no instrumentation when started. Back up camera is also on the same circuit as are the mirrors. Warning lights on dash are intermittent . Does anyone know what type of ignition switch was used? The key appears to be of GM type from 80's or 90's with no chip.
Thank you in advance for any assistance with this.

Mike
1999 36 SDS

Skip426 · 03-01-2022, 08:18 AM

I think your dash mounted ignition switch will be similar to what Newmar used .

1972 GMC . PU.

If it's mounted using this type of recess bezel and needs to have the key lock tumbler removed to get the switch out of the dash.

Jeff and Cheryl · 03-01-2022, 02:35 PM

Pull the ignition switch and take to a reputable auto parts store. They will be able to match. I did this with mine a few years ago. All is well.

rrthor · 03-01-2022, 02:46 PM

Replacement for a 2006 Alpine is

Pollak 31-322

mjvalliere · 03-02-2022, 06:30 AM

Hi Skip,
Yes that's exactly what it looks like. And thank you everyone for the guidance.
This forum is the greatest! I truly appreciate all the help I've received here

Mike
36 SDS

mjvalliere · 03-08-2022, 02:22 PM

Hello All and thanks again for the responses. To remove the key tumbler turn the ignition to the accessory position and push in with a paper clip You'll feel the tumbler loosen and turn slightly and pull out. I ordered the switch and bezel online at Amazon should be here tomorrow. Fairly easy install. I'll post a video

Thanks again,
Mike
1999 36SDS 330 Cummins