Body molding end caps

[Ls1Nova]

Has anyone able to find a source for these body molding caps? A few of mine are in pretty rough shape.

Thanks,
Frank

[Alpine36]

Originally Posted by Ls1Nova

Has anyone able to find a source for these body molding caps? A few of mine are in pretty rough shape.

Thanks,
Frank

Following, I could use a couple new ones also.

[Rusty Bear]

Check out this site.
https://www.rvpartscenter.com/shop-b...lding-end-caps

[MKelley]

Aubry's RV in Yakima has the molding's your looking for.

[Ls1Nova]

Originally Posted by Alpine36

Following, I could use a couple new ones also.

If I can't find exact replacements, I will build some, possibly out of stainless. I'll make a few extra for ya if I go that route.

Originally Posted by Rusty Bear

Check out this site.
https://www.rvpartscenter.com/shop-b...lding-end-caps

Thanks. I was able to find those, but they are not exactly like the originals. The sides don't go down far enough toward the body panel. Thank you though!

Originally Posted by MKelley

Aubry's RV in Yakima has the molding's your looking for.

Thank you! I sent them an e-mail to see if they have any.

[Alpine06]

Staying tuned as well I have 2 missing and one is rusty.

[whalepirot]

I've used plenty (old car hobby) of Metal Prep, essential an acid, I believe muriatic, that chemically alters iron oxide to an inert black compound. A quality rust preventive paint as primer, then color as desired may be a substitute for unavailable parts.

[Bking]

Mine are all good but I seem to have what I assume is galvanic corrosion under the paint on my trim strips. I'm not sure at what point I should have someone fix it and attempt to match the paint graphics across them... Anyone else have this issue?
Bob