Livingoom/kitchen slide adjustment……
My living room/kitchen slide needs some tweaking. It’s low on the rear end @ kitchen sink, as evidenced by the paint lines. It looks like the bottom nylon “slide” in the channel is a bit worn. I’ll likely pull it out, and put a shim under it. That should help a little bit. The adjustment screw at the end of the rail (“A” in the pic) is maxed out, so nothing to gain there. Is there a little bit of wiggle room in the slots where the “B” bolts are? I’ll try loosening those and put a jack under the slide to gain a little more lift if there’s enough slop.
__________________
Jimmy……
2001 Alpine 36 mdds
|