I have had the misfortune of having to replace the suburban heater on a Alpine 40MD. Three of the back hoses and the propane are hooked up.It seems I am having a lot of problems getting the two side hoses on. I have cut a hole next to the 50 amp electric hookup and con not seem to turn the hoses enough.
My question is, is there another way to get at the hoses.
Thanks in advance Steve
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
You can slide the internal furnace out of the cabinet before you install the case. As I recall it was easier to hookup the hoses by reaching inside the metal cabinet. Send me a PM if you would like to talk it thru.