05 Sea Breeze power gear oil change

[jeis59]

Hello. Does any one know how to check or fill the oil in Power Gear levelling 501059 using 500731 panel? It seems it has drain on the bottom and no side port to fill and two caps on the top. Thanks.

[jeis59]

Here is the picture of what it looks like.

[Fred and Bonnie]

Yes, drain on the bottom, refill on the top. Be prepared for lots of oil, seems like 12-14qts.

Make sure the jacks are retracted prior to starting.

Fred

[jeis59]

I tried to open both of them by turning counter clockwise but it won't open. It just keep turning.

[jeis59]

I tried these bolts.

[Richard S.]

It may be the push in type plug. Look at the view on page 8 item 6


https://www.lci1.com/assets/content/...g-82-L0506.pdf

[jeis59]

Thanks. I have the manual but tried to open while I pushed, but it was not the way. Any idea how to open them?

[Richard S.]

try pulling

[jeis59]

Thanks.

[Fred and Bonnie]

Yes, pull, it's just a dip stick level indictor. I got tired of messing with the o-ring (Supports the dip stick)and replaced the pull-out dip stick with a rubber plug, checking the fluid level with my finger.

Fred