Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > National RV Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-28-2022, 06:53 PM   #1
Member
 
National RV Owners Club
Join Date: Aug 2016
Posts: 36
2006 SeaBreeze 8341 bedroom TV removal

Does anyone out there have experience removing the bedroom TV? I think it is the original TV--20" Toshiba. Anyway--how is it attached in the cabinet? We can't see any bolts, screws or brackets with the TV in there and don't want to just rip it out (at least not yet LOL). Any secret tricks or pointers on getting it out of there would be so helpful.

Once it's out, we want to replace it with a new one on some kind of mount so any advice on mounts (what works/what doesn't) etc. would also be deeply appreciated--thank you so much!
__________________
2006 National Sea Breeze 8341 LXII (Moby)
Ford Chassis
jzlarson is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-28-2022, 07:47 PM   #2
Senior Member
 
National RV Owners Club
Join Date: Jul 2018
Location: Melbourne, FL
Posts: 324
Our was strapped in with a 2" metal strap. Had to cut the strap with tin snips.

Al
__________________
SeaBreeze LX 8321
FLRosebud is offline   Reply With Quote
Old 09-28-2022, 08:19 PM   #3
Member
 
National RV Owners Club
Join Date: Aug 2016
Posts: 36
Quote:
Originally Posted by FLRosebud View Post
Our was strapped in with a 2" metal strap. Had to cut the strap with tin snips.



Al


Where was the strap and how did you get to it?
__________________
2006 National Sea Breeze 8341 LXII (Moby)
Ford Chassis
jzlarson is offline   Reply With Quote
Old 09-30-2022, 04:34 AM   #4
Senior Member
 
National RV Owners Club
Join Date: Jul 2018
Location: Melbourne, FL
Posts: 324
Quote:
Originally Posted by jzlarson View Post
Where was the strap and how did you get to it?
The strap went around the TV. I had to cut it on the right side where there was enough clearance to get the tin snips in there.

Al
__________________
SeaBreeze LX 8321
FLRosebud is offline   Reply With Quote
Old 10-01-2022, 12:49 AM   #5
Senior Member
 
CamJam1's Avatar
 
Join Date: Mar 2019
Location: Arizona
Posts: 1,997
In my Dolphin the rear TV sat on a metal plate. For the life of me I can't remember where the screws were, but I didn't have to rip anything out to get to them. It did take me a while to figure out where they all were.
__________________
2004 National Dolphin LX 6320, W-22, 8.1, Allison 1000, Front/rear "Trac" Bars & Anti-sway Bars, Sumo Springs, Roadmaster Reflex Steering Stabilizer, 2005 PT Cruiser Toad
CamJam1 is offline   Reply With Quote
Old 10-01-2022, 12:04 PM   #6
Member
 
National RV Owners Club
Join Date: Aug 2016
Posts: 36
Quote:
Originally Posted by FLRosebud View Post
The strap went around the TV. I had to cut it on the right side where there was enough clearance to get the tin snips in there.



Al


Thank you we will definitely check for the strap!
__________________
2006 National Sea Breeze 8341 LXII (Moby)
Ford Chassis
jzlarson is offline   Reply With Quote
Old 10-01-2022, 12:07 PM   #7
Member
 
National RV Owners Club
Join Date: Aug 2016
Posts: 36
Quote:
Originally Posted by CamJam1 View Post
In my Dolphin the rear TV sat on a metal plate. For the life of me I can't remember where the screws were, but I didn't have to rip anything out to get to them. It did take me a while to figure out where they all were.


Thank you-I have also learned from others about a possible bracket like you described, all of these ideas definitely give us good possibilities to explore!
__________________
2006 National Sea Breeze 8341 LXII (Moby)
Ford Chassis
jzlarson is offline   Reply With Quote
Old 10-03-2022, 06:39 PM   #8
Junior Member
 
Join Date: Nov 2021
Posts: 7
My 06 Dolphin had a bottom plate with the bolts in the top of cupboard below tv. I welded up a frame that a mount could attach to. At a latter date I plan on going back and making a frame that will swing up and allow access to the area behind tv.
TimI is offline   Reply With Quote
Old 10-04-2022, 04:03 PM   #9
Junior Member
 
Join Date: Nov 2013
Posts: 8
On our 2000 tropical the TV had a strap around it and a screw through the shelf into the bottom of the TV case. The screw was reachable from the cupboard below
fredar92 is offline   Reply With Quote
Old 10-04-2022, 06:40 PM   #10
Member
 
Julia2005's Avatar
 
National RV Owners Club
Workhorse Chassis Owner
RV Trip Wizard
Join Date: Jan 2022
Posts: 80
If your TV is in the corner cabinet like mine is, there is a metal bar screwed to the bottom of the tv and then there is another metal plate that is screwed to the cabinet that hold the plate on the TV down to the cabinet. All I had to do is remove the screws holding the plate to the cabinet and the TV lifted out. The screws were along the front of the TV.
__________________
Bruce & Zoe
2005 SeaBreeze LX 8360 - 2020 Jeep Rubicon
Full Timers
Julia2005 is offline   Reply With Quote
Old 10-05-2022, 12:39 AM   #11
Member
 
National RV Owners Club
Ford Super Duty Owner
Join Date: Sep 2007
Location: Pioneer, CA
Posts: 36
Bedroom TV removal

Just following for the good information on how to remove my bedroom TV from an 2007 Seabreeze LX 8341.
__________________
2007 National RV Sea Breeze 8341 XL, F53 chassis
1999 Jeep Wrangler TJ Sport
Pioneer, CA
billdye is offline   Reply With Quote
Old 10-05-2022, 09:40 AM   #12
Member
 
National RV Owners Club
Join Date: Aug 2016
Posts: 36
Lots of helpful info so far- there are no screws visible either above or below- we will check it all again this weekend!
__________________
2006 National Sea Breeze 8341 LXII (Moby)
Ford Chassis
jzlarson is offline   Reply With Quote
Reply

Tags
bedroom, removal, seabreeze, television



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 Sea Breeze 8341 LX standard antenna question jzlarson National RV Owner's Forum 6 09-21-2017 05:54 AM
Satellite coaxial 07 Seabreeze LX 8341 Bjammin National RV Owner's Forum 1 06-30-2017 07:49 PM
STINKY PROBLEM 2003 Seabreeze LX 8341 Kliwks National RV Owner's Forum 13 10-21-2015 07:14 AM
tv removal bedroom 2004 Seabreeze Samflhomes National RV Owner's Forum 3 11-09-2009 10:41 AM
New Sea Breeze LX 8341 Glenn and Kathy New Rig Show-Off! 10 12-19-2005 02:44 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:40 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.