Community Forums

rdownward · 08-29-2018, 11:58 AM

Hi again everybody. I now have a new challenge that I hope somebody who is smarter than me can figure out. Does anybody know how to release the drawer glides on the under counter galley storage drawers? I have tried everything I can think of but without success. Here's a photo of the drawers I am referencing.

jfoldesi · 08-29-2018, 01:22 PM

Pull drawer out until it stops, then give it a strong stead pull. It will come out.

Scooter · 08-29-2018, 04:24 PM

Think #2 is correct. Could be a nylon doohickey that has to flex inward or forward, for the drawer to come out.

rdownward · 08-30-2018, 01:55 PM

Nope.. It won’t come out that way. Every other drawer in the coach comes out just by giving it a strong pull once it reaches the end of its travel. These won’t budge. They act like there must be some sort of release catch holding them in but I can’t find one. These drawers have two glides on the bottom of each one and the drawers are about 24” deep so I think these glides are more heavy duty and are different from those on the smaller drawers throughout the rest of the coach which have a single glide down the middle of the bottoms. I even tried removing the screws that hold the glides to the drawers but there is one more screw on each side that I can’t get to without the drawer coming out a couple of inches further that needs to be removed to get the drawer loose from the glide. I’m totally stumped at this point.

wmiii · 08-30-2018, 02:03 PM

Could there be a little lever on the slides that releases them. Look under the drawers and see how they look.
I've seen side slides that have some type of release like that.

10EC · 08-30-2018, 02:18 PM

Quote:

Originally Posted by rdownward

hi again everybody. I now have a new challenge that i hope somebody who is smarter than me can figure out. Does anybody know how to release the drawer glides on the under counter galley storage drawers? I have tried everything i can think of but without success. Here's a photo of the drawers i am referencing.

my 7370 had drawers that look like yours under my table bench seats. I took the carpet out bottom of the drawer to acess the screws then could get screws attaching slide to the bottom wood.

Never did get slides seperated.

I left my whole drawer ( floor level) out to give more room for couch/bed pillows and covers. Now have to acess by picking up table bench seat, gave lot more room for storage.