Can someone identify this part ?

[dansawyer]

I am chasing air leaks. The device in the picture is in front of the primary and secondary air tanks. The picture is bottom up. There are 6 total connections
2 electric visible on the left and rights sites
2 what look like ait on the left and right sides
1 drain, simple small hose
1 identified air coming into the bottom
The left and right sides are plastic electrical connectors. The one on the right has a positiononaly sensitive air leak. That is what I am chasing down to fix.

For scale, it is about 7 to 8 inches left to right

[Oldkarphart]

Norgren Valve.

[dansawyer]

Thank you. If I read the chart correctly the air source is from the secondary tank and the valve distributes air to the air bag control valves.

There is a small leak on one of the connections. I am away and am looking to get home safely. I will try to zip tie the connector to be fixed in place.

I will have to look into the model number and any rebuild kits.

[dansawyer]

Question:

Is this a two way valve or a one way valve.

By two way I mean does it both pass ari from the secondary tank to the air bag circuit and does it also release air from the bags?

By one way I mean does it only pass air from the secondary tank to the bag circuit and there is another circuit to release air?

Thanks in advance. Dan

[TVdeacon]

looks to be a solenoid/air valve. several makers of these and often used to control 2 way systems. in this case possibly used to fill or dump your suspension. these valves are modular units made of solenoids and valve bodies and prone to trouble if moisture gets in. the air leak may be the result of that or simply a fitting. good luck