Your Power Gear slideout system has been designed to require very little maintenance.
To ensure the long life of your slideout system, read and follow these few simple
procedures.
CAUTION: DO NOT WORK ON YOUR SLIDEOUT SYSTEM UNLESS THE BATTERY
IS DISCONNECTED.
• When the room is out, visually inspect the inner slide rail assemblies. Refer to Fig. 4
for location of inner rail assemblies. Check for excess build-up of dirt or other foreign
material; remove any debris that may be present.
• If the system squeaks or makes any noises it is permissible to apply a coat of light
weight oil to the drive shaft and roller areas but, remove any excess oil so dirt and
debris do not build-up. DO NOT use grease.
__________________
Full-Timers
2000 Sea View 34' Ford V10
|