Inverter Error display

[budhorning]

I have an XM 1800 inverter. While we were boon docking, every thing was going great. When I started the engine. The display panel beeped and starting flashing E05/OL. Meaning overload. I have
1. checked each of the 3 main breakers at batt compartment
2. Checked the 200 amp buss fuse for the inverter feed
3. Reset breaker at inverter
4. Reset in house inverter breaker
5. unplugged everything to reduce the load.

the display is still flashing the same error code.
I am now connected to shore power and everything works fine, but we are planning on heading to Quartizite and will boon dock there.
any suggestions on how to proceed trouble shooting. I have read the Inverter owners man.

[chboone]

I don't have that model inverter but have read that unplugging the communication cable to the control panel for about 30 seconds will reset it.

[tmw188]

Originally Posted by chboone

I don't have that model inverter but have read that unplugging the communication cable to the control panel for about 30 seconds will reset it.

Budhorning, how did that work out we all want to know.