LED tail light assemblies

[LeeSoCal]

I am looking for some LED tail light assemblies for my 08 Dolphin. I have done a search and I can't seem to find the correct ones. Do any of you know what these assemblies were originally out of?

[Mekanic]

Why not just use bulbs that are fitted with LEDs?

[C-PHartley]

I had to replace mine as the lights and covers were cracked and/or broken (15 yrs old). I was able to find an SAE number on the lights that was able to be matched. My lights were made by Bargman. their website was helpful as well as their phone support. You can enter the light number on Amazon to look for pricing and availability. I found good pricing and service for my lights at Tweetys.com.

I hope this helps.

[wa8yxm]

Why do you feel you must match the OEM.. If the mounting surface is flat (Big IF there) then you can get any assembly which is LARGER and simply remove and put in place over the existing.

If you visit one of the major "Chrome shops" like the Iowa 80 Truck stop on I-80 in Iowa or "South of De Border" on the South Side of the country, They have a very very very wide assortment of both LED and traditional light assemblies on display.

(I only listed shops I've seen, though Pedro's was.. 1976 as I recall)

[BarryN514]

Saw a coach the other day at a traffic light and he mounted a long light bar in the center of the coach (rear) and it sure did give him more stop lighting when he stopped. Thinking about doing that as well, just for being more visible.

Here is one example what I found in the internet.

Long, Thin Oval LED Trailer Stop, Turn and Tail Light, 3-Function, 11 Super Diodes Optronics Trailer Lights STL76RB

[DALarry]

I have a 07 Pacifica and the tailight assemblies are from a 2007 dodge ram 1500 P/U. Go figure. You might check that out.

[barturo]

i removed my bargman 92 tail lights and install two 6 inch oval led stop/turn/tail
on each side of the back of my trailer