Lost a stainless steel center cap

[Five92]

On my return from my stint at the Washington coast - where I had issues with a GFCI circuit.... One of my front stainless steel wheel simulator center caps flew off somewhere. Not the entire 22.5” wheel cover - just that center cap that covers the oil bath hub. Anyone have any idea wheee I can buy a new one of these?

[DKStall]

I bought a replacement at a truck stop. Looked good, right diameter, but didn't fit. Turns out there are 4 & 5 tab covers. You've got to have the correct one for your hubs. Love's only had 5 tab so I ordered a 4-tab set from AW Direct and the fit perfectly. My coach may be different than yours, but they have both. I put the link in their name above.

[Five92]

For those who may have the same issue as me - lost a center cap for the stainless wheel covers. -I believe I have found the correct site for the NRV/workhorse chassis factory wheel covers. Right down the the decal. They appear to be from Dicor Corporation. You can look at them at the following website. https://www.dicorproducts.com/wheel-application-chart/. Anyway - don’t know if this will work but it has an application chart for your chassis and year application.