Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > National RV Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-16-2014, 07:26 AM   #1
Senior Member
 
Rook's Avatar
 
National RV Owners Club
Solo Rvers Club
Freightliner Owners Club
Join Date: Mar 2011
Location: FT for 6 years, NW in the summer, S in winter.
Posts: 1,173
Lounge Chair part needed.....

I will post a photo later, if I don't get any responses on this.

The plastic release for the Lounge chair rotation has broken. It's the black plastic part, mounted with two screws, on the left side of the chair, with a lever and cable connection going down under the chair to release the rotation catch. This same part is mounted on the right side of the chair that releases the catch allowing the chair to move foeward and backward. There is at least 4 of these plastic parts mounted on the driver and passenger seats, as well.

Does anyone know a source of supply for these parts? Rook
__________________
When you get a chance to dance, or sit this one out......I hope you DANCE!

98 National Tradewinds 7370, powered by a 3126B 300HP CAT Turbo, Freightliner XC chassis
Rook is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-16-2014, 07:59 AM   #2
Senior Member
 
Richard S.'s Avatar
 
National RV Owners Club
Ford Super Duty Owner
Join Date: May 2007
Location: El Cajon CA
Posts: 2,084
THIS LINK MAY HELP

Flexsteel Seat Parts, RV Seat parts, RV Furniture Parts, Marine Furniture Parts, Motorhome chair parts, RV Chair Parts

also KUSTOMFIT this was who National used

http://www.kustomfit.com/
__________________
2007 Sea Breeze LX 8321 Ford Chassis
2004 Ford Ranger Edge
El Cajon CA.
Richard S. is offline   Reply With Quote
Old 07-16-2014, 10:37 AM   #3
Senior Member
 
Theberrys's Avatar
 
National RV Owners Club
Join Date: Jun 2009
Posts: 2,618
Rook

I gave it a pretty good search and didn't find any with the paddle handle and the sheet metal mounting bracket. You may have to use one of the newer types like Richard pointed to or perhaps a ring pull type. I'd do a recessed type, even though it's gonna mean cutting the chair. You can get an idea of the job by removing the power seat control on the driver's side seat. This will at least let you see how the seat's made. You may also want to try calling Colaw and see if they have any, they will defiantly need a picture, but the last time I was there they had three or four Tradewinds of the right vintage.

Colaw RV Used Parts - We Have Your Part...

Here is a link to the offers to sell what you may have to settle for.

recliner pull cable | eBay

Sorry it's not better news.

Dick
__________________
1999 Tradewinds 7372 Cat 3126
Albuquerque, NM
Theberrys is offline   Reply With Quote
Old 07-16-2014, 12:46 PM   #4
Senior Member
 
Rook's Avatar
 
National RV Owners Club
Solo Rvers Club
Freightliner Owners Club
Join Date: Mar 2011
Location: FT for 6 years, NW in the summer, S in winter.
Posts: 1,173
Thanks for the searches and the references.....I found this one.....looks like it might work, I will need to drill new mounting holes. With shipping, not cheap.....$35.00. Rook

http://www.coachsupplydirect.com/s/c...g?t=1404395370
__________________
When you get a chance to dance, or sit this one out......I hope you DANCE!

98 National Tradewinds 7370, powered by a 3126B 300HP CAT Turbo, Freightliner XC chassis
Rook is offline   Reply With Quote
Old 07-17-2014, 02:50 AM   #5
TSM
Member
 
Join Date: Nov 2013
Posts: 75
Replaced the cable for the drivers seat, found the exact cable at www.kustomfit.com. Replaced both the swivel and reclining cables, ordering extra cables. 2006 National Sea Breeze.

TSM
TSM is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Old Dometic Junk Yard Needed for Fridge Part TriMoot Class A Motorhome Discussions 3 05-02-2014 12:33 AM
Lounge Chair Foot Rest Won't Open J Walker Palazzo Motorhomes 6 04-14-2014 07:53 PM
How to Haul A wheel Chair Ted Lambert Class A Motorhome Discussions 1 04-12-2014 07:54 PM
Rattle behind drivers chair johnnyreno Entegra Owner's Forum 9 04-06-2014 06:57 AM
New captains chair wiring lweekly Winnebago Industries Owner's Forum 7 08-06-2013 04:01 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 06:32 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.