I had to take down my shade as it was bunching up. Solved that problem but now I cant seem to set it at the proper start and stop heights again. I gather that I should have avoided disconnecting the 12 volt from it. Does anyone have a manual or instructions for making the settings? The part number of the motor is 2005/07 0581 and it's made by Automotionshade out of Canada.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I have to assume yours is different than my 06. Mine runs in either direction until o let go of the switch. Are you saying you only have up or down and need to set limit switches?
__________________
Ray, Cheryl, O'Connell and of course Miss Molly Silky Terrier mix
Isn’t there a small hole that you need a small pin to push a button in to start the programming? Once it beeps then you lower your blinds to the level you want them to stop then raise them to the height you want them to stop.
__________________
07 Dalphin 5342, F53 with full body paint, 200 w solar. NCRS member 1961 Corvette,1966 2+2 Mustang, FXSTC, Larson 204 Escape