Community Forums

KLMNOP · 05-11-2022, 09:07 PM

Hello all,

I hope that posting here will help me find my problems that I've come across (so far) in my journey of owning an RV.. My boyfriend and I recently purchased a 1995 SeaBreeze P30 (idk if that's the model no. that's just what's on the title) for a veeeeeeeery good price, but of course it's going to need... some work.....

I am hoping to get my hands on some sort of plumbing Diagram & an electrical diagram. Really, any sort of manual (if other years will work for this, then i am up for it)..
Also, i am hoping someone can provide me with some info on the interior switches on the entrance on the left hand side that would have been on the back of the bench seat for the dining room table.. when purchased it was removed & the wires are clipped at the bottom..

Any info from anyone will be greatly appreciated!!

momdoc · 05-11-2022, 09:38 PM

Welcome to the forum and congrats on the new rig.

You are joining a good group of friends here with good information to share. Read the various threads here and ask questions as they come up or add information if you can. I am sure a lot of what you are looking for can be found here.

Good luck and enjoy the adventure!

HarryStone · 05-11-2022, 09:39 PM

Here's a brochure to start you off. And Welcome to the forum

https://www.rvroundtable.com/wp-cont...VSeaBreeze.pdf

Cpl Ed · 05-16-2022, 09:37 AM

Here is a .pdf download of you're '95 SeaBreeze.

https://www.nrvclub.com/sea-breeze

Hope this help's...

vhlewisii · 05-17-2022, 02:46 PM

I took pics of mine before I had to clip the wires to remove rotten bench seat. Let me see if I can find it.

We have a 96 seabreeze

spinroch · 05-17-2022, 04:27 PM

P30 is the designation of the Chevrolet P30 chassis.
You may find that the RV is one model year and the chassis is another. You can look up the VIN (vehicle identification number) to be sure. With my Holiday Rambler, I found my RV is a ‘97, the Chassis is a ‘96 and the engine is a ‘95. Use IRV2 and the internet to download and collect information on your specific RV. There is a wealth of information to be found if you search the IRV2 forum archives.

SeaBreazer · 05-18-2022, 06:03 AM

I have the p30 chassis service manual for the 96 chassis. We just traded in our 1996 National Seabreeze 131. I will let it go for postage to anyone that wants it.

The sites by the door are the step power, Dinette lite, under step light, outside grab handle light. Then you have the coach power disconnect switch.
I did alot of major repairs on the old coach so I got pretty familiar with the unit.

Any questions on the unit I will try to answer your questions.

vhlewisii · 05-19-2022, 06:23 AM

Tell me where to send the money! I've sent a PM

KLMNOP · 05-22-2022, 04:31 PM

Quote:

Originally Posted by vhlewisii

I took pics of mine before I had to clip the wires to remove rotten bench seat. Let me see if I can find it.

We have a 96 seabreeze

Hello! I'm sorry for the delay in response- we've been trying to get a running tally of what has to be fixed etc all while I'm simultaneously recovering from gallbladder removal surgery so it's been hectic 😂. Since you clipped your bench seat, do you know what each wire would possibly go to or a wiring schematic of any sort that could tell us? Because we got it with the piece already missing and the wires already clipped... i have attached a photo of what it looks like currently. We want to try to do some sort of rocker switches, not sure if you or anyone for that matter has any info or insight on doing this right..

KLMNOP · 05-22-2022, 04:35 PM

Quote:

Originally Posted by SeaBreazer

I have the p30 chassis service manual for the 96 chassis. We just traded in our 1996 National Seabreeze 131. I will let it go for postage to anyone that wants it.

The sites by the door are the step power, Dinette lite, under step light, outside grab handle light. Then you have the coach power disconnect switch.
I did alot of major repairs on the old coach so I got pretty familiar with the unit.

Any questions on the unit I will try to answer your questions.

Hello! I'm sorry for the delay in response- we've been trying to get a running tally of what has to be fixed & it's been a journey already lol- Since you have worked on that area a lot, do you know what each wire would possibly go to or a wiring schematic of any sort that could tell us? Because we got it with the piece already missing and the wires already clipped... i have attached a photo of what it looks like currently. We want to try to do some sort of rocker switches, not sure if you or anyone for that matter has any info or insight on doing this right. Thank you!!