|
08-07-2022, 08:20 PM
|
#1
|
Junior Member
Join Date: Aug 2022
Posts: 2
|
OBDII Location?
Hello, new here so thanks in advance for any insight. I have a 2007 Surf Side 29A with a 2006 F53 ford chasis. The check engine light is on, and for the life of me I cannot find the OBDII location.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
08-07-2022, 08:26 PM
|
#2
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,269
|
Welcome to iRV2
Ford had so much trouble with coach manufacturers not relocating the OBD II connector to a visible location , they issued this bulletin .
Screws that are holding it to the column are either Philips or 1/4" hex , remove and relocate the connector .
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
08-07-2022, 09:36 PM
|
#3
|
Senior Member
Damon Owners Club
Join Date: Apr 2020
Location: Clovis NM
Posts: 4,389
|
I have an 06 chassis, and the connector is attached to the column, jut above the plastic cover at the base of the dashboard.
__________________
2006 Damon Daybreak 3276 35'with 5 Star Tuner. 3 200 Amp Lithium batteries and 2000 watt PSW inverter/charger. 2013 Elantra on a Master Tow dolly.
Retired USAF
|
|
|
08-08-2022, 07:28 PM
|
#4
|
Junior Member
Join Date: Aug 2022
Posts: 2
|
Thanks for the feedback. I'll try to dig into it this weekend.
|
|
|
08-11-2022, 10:37 PM
|
#5
|
Member
National RV Owners Club Ford Super Duty Owner
Join Date: Sep 2007
Location: Pioneer, CA
Posts: 39
|
OBDII location on 2007 Sea Breeze 8341
I was able to find mine as described by Ford attached by a small bolt on the right hand side of the steering column.
To gain access to it, I removed the right side panel of the dashboard containing the radio, A/C and heater controls and an A/C vent at the top of the panel. Easy enough to get to the OBDII connector after pulling out the right side dashboard panel a few inches, enough to get one hand on the OBDII port.
It might be possible to gain access to the OBDII port by removing the small plastic cover on the bottom of the steering column once you know where the OBDII connector is.
Bill Dye
__________________
2007 National RV Sea Breeze 8341 XL, F53 chassis
1999 Jeep Wrangler TJ Sport
Pioneer, CA
|
|
|
08-16-2022, 03:19 PM
|
#6
|
Junior Member
National RV Owners Club
Join Date: May 2021
Location: Meridian, Idaho
Posts: 10
|
I have a 2002 Seabreeze and my connector is about the same location as this one. It is on the column and I found it zip tied to a little bracket that's pressed out on the column for it to attach to. If you're not a contortionist you may not be able to get up under there. You'll have to get an 8 year old to understand what you're looking for and then they can get up under there and get to your connection. I had one of those semi-permanent monitors to plug in and I got my neighbors 10 year old girl to put a plug it in for me.
__________________
Capt. Rick
National RV 2002 Sea Breeze 8311 LX
DC Voltage Systems Engineer and Technician
|
|
|
08-16-2022, 05:16 PM
|
#7
|
Member
National RV Owners Club Ford Super Duty Owner
Join Date: Sep 2007
Location: Pioneer, CA
Posts: 39
|
Revised location for Ford F53 OBDII port
As a follow up to my previous post above, I removed the OBDII port from the original location mounted to the steering column and remounted it using the same mounting screws to the bottom of the removal panel below the steering wheel. So now the OBDII port is easily reachable below the dashboard just below the steering wheel (not too much different than those installed on every other non-motorhome vehicle).
Hope this suggestion may help others looking for the OBDII port on a F53 chassis.
Bill Dye
__________________
2007 National RV Sea Breeze 8341 XL, F53 chassis
1999 Jeep Wrangler TJ Sport
Pioneer, CA
|
|
|
08-17-2022, 10:09 AM
|
#8
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,269
|
Quote:
Originally Posted by billdye
As a follow up to my previous post above, I removed the OBDII port from the original location mounted to the steering column and remounted it using the same mounting screws to the bottom of the removal panel below the steering wheel. So now the OBDII port is easily reachable below the dashboard just below the steering wheel (not too much different than those installed on every other non-motorhome vehicle).
Hope this suggestion may help others looking for the OBDII port on a F53 chassis.
Bill Dye
|
EXACTLY , what the coach builder should have done during dash installation.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|