Visor
It wasn't to bad. It has been a while a go since I did it but what I remember you need some help to support the visor when taking it off and putting up after the repair. Putting the motor in the visor was not hard at all. They have a web page on how to install the motor and how to program the stops after you install the visor. I found my motor fit right in and I didn't need to trim the OD of the motor housing. Good luck
__________________
07 Dalphin 5342, F53 with full body paint, 200 w solar. NCRS member 1961 Corvette,1966 2+2 Mustang, FXSTC, Larson 204 Escape
|