|
10-03-2015, 11:05 PM
|
#1
|
Senior Member
Workhorse Chassis Owner
Join Date: May 2009
Posts: 207
|
Storage door liners are swelling out at corners
The foam liner at back of doors us swelling out at corners quite a bit
I am trying to inject liberal amounts of Dicor and couple of strong claps to get them back in place. Not dry yet so not sure that will work
Anyone have Experience with this?
Thanks
__________________
Sam Leonard
2004 National Seabreeze 8321LX
W-22
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-04-2015, 06:39 AM
|
#2
|
Senior Member
National RV Owners Club Ford Super Duty Owner
Join Date: Sep 2014
Location: Georgia
Posts: 588
|
I have the same problem on one of my doors and am hoping someone has a good answer.
__________________
Jerry and Barbara,
2005 Nat Sea Breeze 1321
2010 Honda CR-V toad
|
|
|
10-04-2015, 06:24 PM
|
#3
|
Member
Join Date: Mar 2011
Location: MACON, GA
Posts: 99
|
Come guys... I got this problem too... need a little help here... somebody, anybody
__________________
2004 National Tropi Cal T370, Cat Power
"SEMPER FI" Married to my best friend for 47 years
We are self employed dog groomers for 43 years
|
|
|
10-05-2015, 05:05 PM
|
#4
|
Member
Join Date: Mar 2011
Location: MACON, GA
Posts: 99
|
No one got SWELLED doors?????????????
__________________
2004 National Tropi Cal T370, Cat Power
"SEMPER FI" Married to my best friend for 47 years
We are self employed dog groomers for 43 years
|
|
|
10-09-2015, 11:58 PM
|
#5
|
Senior Member
Workhorse Chassis Owner
Join Date: May 2009
Posts: 207
|
The Dicor did the trick. Took a couple days to dry
Closing the doors also added pressure to seal the liners back into the door panel
__________________
Sam Leonard
2004 National Seabreeze 8321LX
W-22
|
|
|
10-10-2015, 09:14 PM
|
#6
|
Senior Member
National RV Owners Club
Join Date: Mar 2012
Location: Lac Du Bonnet, Manitoba
Posts: 685
|
Ours did the same. I pushed 1/2" X 1/2" aluminum "L" trim along each side between the door edge and foam core then squeezed the foam core back into place with C-clamps , then riveted thru the door edge into the aluminum trim. This was 3 years ago and has held up fine.
__________________
Ellen & Greg
08 National Dolphin DL-35Ci, RoadMaster Rear Sway Bar, Rear Trac Bar, Koni Shocks Front,
Workhorse W22, Kelderman Air Ride, Towing 2016 Smart Car
|
|
|
10-11-2015, 08:26 AM
|
#7
|
Member
Join Date: Mar 2011
Location: MACON, GA
Posts: 99
|
Pictures... ?
Quote:
Originally Posted by GREGORYJ
Ours did the same. I pushed 1/2" X 1/2" aluminum "L" trim along each side between the door edge and foam core then squeezed the foam core back into place with C-clamps , then riveted thru the door edge into the aluminum trim. This was 3 years ago and has held up fine.
|
Do you have pics of this?
__________________
2004 National Tropi Cal T370, Cat Power
"SEMPER FI" Married to my best friend for 47 years
We are self employed dog groomers for 43 years
|
|
|
10-11-2015, 06:17 PM
|
#8
|
Senior Member
National RV Owners Club
Join Date: Mar 2012
Location: Lac Du Bonnet, Manitoba
Posts: 685
|
On the road now, so will take pictures and post when I can.
__________________
Ellen & Greg
08 National Dolphin DL-35Ci, RoadMaster Rear Sway Bar, Rear Trac Bar, Koni Shocks Front,
Workhorse W22, Kelderman Air Ride, Towing 2016 Smart Car
|
|
|
10-11-2015, 07:48 PM
|
#9
|
Senior Member
National RV Owners Club Nor'easters Club Ford Super Duty Owner
Join Date: Jun 2011
Location: CT
Posts: 778
|
Quote:
Originally Posted by GREGORYJ
Ours did the same. I pushed 1/2" X 1/2" aluminum "L" trim along each side between the door edge and foam core then squeezed the foam core back into place with C-clamps , then riveted thru the door edge into the aluminum trim. This was 3 years ago and has held up fine.
|
That's a genius solution to this problem!
__________________
2005 National Sea Breeze 1311
2015 VW Tiguan SE 4Motion (trailered)
Follow us online https://OurRVJourney.com
|
|
|
11-02-2015, 06:26 PM
|
#10
|
Senior Member
National RV Owners Club
Join Date: Mar 2012
Location: Lac Du Bonnet, Manitoba
Posts: 685
|
__________________
Ellen & Greg
08 National Dolphin DL-35Ci, RoadMaster Rear Sway Bar, Rear Trac Bar, Koni Shocks Front,
Workhorse W22, Kelderman Air Ride, Towing 2016 Smart Car
|
|
|
11-05-2015, 10:18 AM
|
#11
|
Senior Member
Join Date: Aug 2010
Location: Morgan Hill, CA
Posts: 183
|
Brilliant!!
Outstanding!!
I will be doing the same thing on a couple of doors. I think once the aluminum is in place a bead of sealant along all edges might be in order.
Thanks for posting,
~Bill
|
|
|
11-20-2015, 02:15 PM
|
#12
|
Senior Member
National RV Owners Club Workhorse Chassis Owner
Join Date: Jul 2006
Location: San Jose, Ca.
Posts: 1,334
|
That's a great idea. I have a few that are coming loose. An other problem has been the attachment anchors for the struts. Here's a fix for that
[/URL][/IMG]
__________________
Rick and Julia
2005 Dolphin 5376, W24, Solid Body Paint, Koni FSD's
Looking for a new toad
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|