Community Forums

Rom · 02-12-2009, 06:54 PM

After having problems with a wiper that would not stop, I need to replace the blades. And I can't believe how hard it is to find one that would fit. I'm currently in Yuma and I've tried almost all the auto/RV supply stores and even Fisher Chevrolet (a Workhorse SC) to no avail. Anybody knows where I can buy or order a pair. Responses would be greatly appreciated. Thanks!

Richard S. · 02-13-2009, 02:43 AM

ROM,
The link below will get you to the supplier to National RV. Look at New 2009 Product Catalogs

http://www.densoheavyduty.com/windshield.php

Richard S. · 02-13-2009, 03:37 AM

Another link for wipers.

http://www.tricoproducts.com/i...n_id=106&clicksrc=rv

Mike Canter · 02-13-2009, 04:36 AM

If you have a hard time finding them try NAPA. The NAPA blades are really the Trico blades and they can order them.

two2go · 02-13-2009, 06:26 AM

I just went with off the shelf 24" blades from Wal Mart and fabricated a nut/clip out of a small square of sheet aluminum.

Rom · 02-13-2009, 01:50 PM

Thanks everyone. I'll keep those links for when I get back home. For now, I just bought a pair of 26" blades, pull the refill out and put them in on my wiper. This will do for now as I know driving back to Washington, in most probability I will encounter "rain".

Mike Canter · 02-13-2009, 06:09 PM

Also, my NAPA blades came with the little bolt and nut. The problem with using regular car off-the-shelf blades is that the area around where the little bolt goes through was always too wide because of the lip around the little tube that the bolt goes through and it put the blade in a bind on my windshiel on the outer edges where the glass curved.

EL LOBO · 02-14-2009, 06:15 AM

Trico refill "47-800" package has two refill blades that replace original blades perfectly, a little trickey getting old rubber out just take your time, Kragens,Checkers or any where that sells Trico. Just replaced both on our "07" Dolphin for $8.00.

Jim

jerseyjim · 02-15-2009, 02:46 AM

Camping World has 'em....they have just about everything...but i think they only have the complete assembly. Last I checked...something like $30+ each.