14 Bus 37 AP kitchen slide mounting bolts

[Dsrtrider]

Has anyone looked at their Kitchen slide stove bolt mounting bolts? I was sitting in a lawn chair on the patio side and noticed 3 or 4 of the slide mount stove bolts were far from tight. I said to myself loose slide bolts can lead to future problems. Im tackling it today. Pulled the outside refrig access panel and the one there had no nut on it. Put a washer ,lockwasher and nut on it cant get it real tight because of the angle. There is another one abt 10 in forward you cant get to. Most likely will have to pull the frig for access and to tighten the other one correctly. There are 2 more in dinette area and there are 2 more in outside TV area i havent figured out how to accesss yet.

[1doodadd]

Can you post some pics?

[Dsrtrider]

Ok the last 2 bolts i have to do are behind the Kitchen pull out . I have to get help to do that. So far I have found 2 that have had missing nuts that must have been missing from the factory,

[1doodadd]

I am at a loss to follow just what you are talking about. Interested because I own the same coach. I have adjusted the two front slides because when closed the paint graphics did not match up now they are. Can you post pics of what you are working on?

[Dsrtrider]

I dont know how to post pics here. Open your kitchen slide out and look up at the carriage bolt heads to the brackets and see how flush they are. Thats how i discovered mine.