2018 Tiffin 40 IH 120v outlet problem

[Fishon726]

My 3 outlets in the Kitchen backsplash quit working. I checked GFI in Bathroom and reset. That Plug has power but 3 in kitchen backsplash still do not have power. I also checked breakers in closet. I have 2 breakers for GFI #1 and GFI #2. I can only find a single GFI with reset button in half bath. All other outlets work. Thanks in advance for input.

[Lt Dan]

We have the same floor plan and the bathroom GFCI does control the three outlets on the kitchen backsplash. It's possible the GFCI has gone bad, but the most likely problem is a loose connection where the wiring for the slide plugs together in the basement. They use Molex plug together connectors at junction points where a slide is involved.

[Warhorse6]

You should have a gfi outlet in the wet bay as well as one under the passenger front slide. Hope that helps.

[ernieh]

My 1 1/2 bath Phaeton also has a GFI in the 1/2 bath.

[Fishon726]

Here is resolution. The half bath gfi first feeds outlet in first bay on passenger side. That outlet then feeds galley outlet and microwave out. That plug has 1 incoming power Romax from gfi and two outgoing Romax to microwave and galley outlets. The last set of wires came loose in outlet which powered the 3 galley outlets. IMHO 3 sets of wires too much for plug based on how they snap in. Tiffin service person agreeded. I replaced outlet with standard household outlet and they will never come loose again. Having good voltage tester and Tiffin Service on line was essential. They walked me through process until it was determined the line of travel of power. Then it was easy. Thanks Tiffin Service!

[Warhorse6]

Glad you got it fixed and posted the resolution. Great news.