I noticed that one side of the bed slide in our bus is rubbing on the carpet. Anyone know how to access the roller on this slide?
It’s the side nearest the closet.
I can see the roller but no way to reach it from under the bed slide.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Figured it out, to access the rollers lift the floor of the bed storage, access to the rollers is at each corner. Adjustment is made by turning the 1/2” nut to raise of lower the bed .
These rollers are not listed in the Tiffin parts store. I found it by searching for adjustable Rv rollers. https://casshudson.com/pages/rv-rollers-brackets
When I raised the roller, I found that the wooden framing had cracked, could not believe that the frame is not even a 2x4 but barely 1” thick. I’ll have to use a steel plate to repair the crack. But for now I just adjusted the roller to the proper height.
Linear Mode
