RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Tiffin Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-29-2017, 09:03 AM   #1
Member
 
Join Date: Apr 2015
Posts: 99
AGS starts before voltage setting

My 2013 Phaeton 40 QBH AGS is set to start at 12.1 v and had been doing so for a couple of years. Now with the same 12.1 v setting it starts at about 13.1 v even when driving down the road. I have checked setting and put it again at 12.1 v but still kicking in above 12.1 v. Any ideas?
__________________

Trans. Cajun is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-29-2017, 09:32 AM   #2
Senior Member
 
pcurt23's Avatar
 
Join Date: Apr 2010
Posts: 1,295
Check the temperature setting for the AGS.
__________________

__________________
Pcurt
2007 Fleetwood Bounder 38V
pcurt23 is offline   Reply With Quote
Old 04-30-2017, 06:34 AM   #3
Registered User
 
Join Date: Aug 2014
Location: western NC mountains!
Posts: 4,106
mine did this a while back, for no real reason it started the generator even when it didn't need to - resolved the issue by going to the Magnum ME-RC panel and changed the AGS status setting to OFF, then back to ENABLE. Worked fine from then on...

it's kinda like the 'reboot' on the compruter : )
MisterT is offline   Reply With Quote
Old 05-03-2017, 11:56 AM   #4
Member
 
Join Date: Apr 2015
Posts: 99
I checked the AGS today and the temp setting was on. Turned it off and set voltage start at 11.9 v and we'll see what happens.
Trans. Cajun is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
AGS start voltage vs Low Voltage Cutoff pilotspike Newmar Owner's Forum 8 04-25-2016 10:06 AM
Magnum ME-AGS-S Standalone AGS mikelm48 Newmar Owner's Forum 3 02-23-2016 08:28 AM
AGS am/pm Clock Setting? Czar Of Poop RV Systems & Appliances 4 04-02-2015 07:13 PM
AGS Issue: 2010 Paeton 40-QTH AGS Issue gjw Tiffin Owner's Forum 1 09-06-2013 04:46 PM
What voltage should AGS crank generator? Jdaniel2509 Travel Supreme Owner's Forum 3 08-10-2013 07:06 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:00 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×