Allegro Bay Engine Access

[Catch14me]

I would like to remove the engine cover on my 06 Allegro Bay but can't locate the screws that secure it. A magnet doesn't help and the cover is flush with the floor. Anyone have a picture or good description of the location of the fasteners? Thanks.

[luvlabs]

Get yourself a rare earth magnet (super strong) and drag it along the edge again. Call Tiffin Service and ask them where the screws might be located so at least you will have a starting point.

[Catch14me]

I have a very good magnet. If screws are used they are very well hidden. I was hoping someone had removed their cover and knew where to look.

[riverroamer]

Originally Posted by Catch14me

I would like to remove the engine cover on my 06 Allegro Bay but can't locate the screws that secure it. A magnet doesn't help and the cover is flush with the floor. Anyone have a picture or good description of the location of the fasteners? Thanks.

on my 06 Fred 2 screws are on the lower floor 2in from each corner (1 was missing) & 2 on upper even closer to edges

[Catch14me]

Thank you. Hard to find something that is not there. With your information on where to look I found holes where the screws were supposed to be. I didn't want to pry on it without knowing how it was attached.