Hi Folks,I am attempting to install a CB radio in my 2017 Allegro Red . It looks like the previous owner or the dealer cut the antenna wire but I;m not sure . Is the antenna lead the copper colored shielded cable? I located the end of that cable but it has been cut off under the dash I will have to splice a new connector to it if that is the correct one.Any info will be greatly appreciated !
Thank you
Pete V
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
It probably is the antenna cable as they are copper in the core/center, with shielding on the outside. I would just put a standard coax connector on what you have now, then get a barrel connector, and attach a small regular patch coax cable to reach the desired location of the radio.
__________________
2023 Tiffin Allegro Bus 45OPP 2019 Birkshire 34QS - Traded
2020 Jeep Cherokee Trailhawk with BlueOx/AF1
Linear Mode
