OCD once again. I have been bugged to find a way hold larger sized thermal water cups ( 3" diameter) in our Tiffin cup holders without the cup flopping over. I found these cups on ebay ( no affiliation) and they fit snuggly in the existing cup holder. the only modification needed is to clip some tabs in the bottom of the cup. EBAy address: https://www.ebay.com/itm/Black-Singl...72.m2749.l2649
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Home Depot - 3 inch PVC Clean out. Male thread keeps the PVC in place in the cup holder. Holds water bottles and large cups great. Easy to remove if you have something smaller to put in the cup holder...
Jeff- while the plastic cup works great on the drivers/passenger cup holders, i forgot about the cup holder in the center sliding drawer. i just checked the plastic cup on it and on my model ( 2016 Bus 37ap), the adapter is too tall to close the drawer.
Linear Mode
