Igniter needed

[IFlyABus]

I have a Princess Gourmet stove, model 2277 with BSI burner caps. Can't seem to find just the igniter. A rep at Sure Marine Service said I need part number 75420, injector holder for the 7K burner. Trouble is, these stoves are no longer made, and parts are scarce (or so he says). He said he can sell me a 10k burner since they have no 7k burners, and I can just swap out the igniters myself. About $25 plus shipping.

Surely there is a place that sells just igniters, or at least has a better selection of stove parts for these stoves? Hoping someone here has dealt with this issue and can point me in the right direction.

[BFlinn181]

If the burner and a jet is O.K., you just need the ignitor, instead of replacing the whole burner you could just install a Piezoelectric igniter like used on gas BBQs. Amazon has them, so do most places that sell BBQ replacement parts.
https://www.amazon.com/Weber-7510-Ig...=piezo+igniter
If your spark 'button' still works, Amazon also has just the sparking part to install near the burner.

[jlturner]

You can swap out and upgrade to a new induction over that plugs in to 110 for 325.00

Small modification to your Corian top.

[Rkesselus]

Or you could just buy a box of strike anywhere matches.

[IFlyABus]

Tried that. Bought a new igniter online that "looked" like it would work. Nope. Too long (which I can modify) and too big around, won't fit into the hole.

Originally Posted by BFlinn181

If the burner and a jet is O.K., you just need the ignitor, instead of replacing the whole burner you could just install a Piezoelectric igniter like used on gas BBQs. Amazon has them, so do most places that sell BBQ replacement parts.
https://www.amazon.com/Weber-7510-Ig...=piezo+igniter
If your spark 'button' still works, Amazon also has just the sparking part to install near the burner.