Community Forums

Jenny63 · 03-24-2017, 03:36 PM

My airbags will not fill. Seems there is now power to the box....any thoughts?

Tizbad · 03-25-2017, 06:59 AM

I had this issue last year and called Hadley. The service tech. on call told me to pull three fuses in the front run bay. One for the jacks, one for Hadley, and one more that I don't recall this morning. All three are right in a row. He said that the Hadley air system gets confused with the jack system, and this is the way to reset it. Your jacks do have to be retracted for this. I did this with the ignition key on the on position.

Jenny63 · 03-26-2017, 05:11 AM

Quote:

Originally Posted by Tizbad

I had this issue last year and called Hadley. The service tech. on call told me to pull three fuses in the front run bay. One for the jacks, one for Hadley, and one more that I don't recall this morning. All three are right in a row. He said that the Hadley air system gets confused with the jack system, and this is the way to reset it. Your jacks do have to be retracted for this. I did this with the ignition key on the on position.

THANKS...but where exactly do I look for this run of fuses? I was not gjven a schematics diagram
Jen

Jenny63 · 03-26-2017, 05:12 AM

Whwre is this located? What is your unit?

Tizbad · 03-26-2017, 05:44 AM

Quote:

Originally Posted by Jenny63

Whwre is this located? What is your unit?

Your front run bay is the outside compartment under the drivers seat. With your jacks retracted and in store position, look for a Hadley fuse and a Jacks fuse. Pull them out for about a min. with either the key on, or with the engine running. I have a 2007 Zephyr and they should be similar.

Jenny63 · 03-27-2017, 06:40 AM

We cannot locate the Hadley fuse anywhere in that compartment.

Tizbad · 03-28-2017, 03:23 PM

Quote:

Originally Posted by Jenny63

We cannot locate the Hadley fuse anywhere in that compartment.

I am sorry your fuses are not in view. I'd suggest calling Tiffin or Hadley for further direction.
The only other thing I can think of is disconnecting all batteries for a couple of min. to see if the Hadley system will reset.