No Sound. Help

[rstp1953]

I have a 2012 Allegro Red 34QFA and I have no sound with dish receiver, DVDs or anything I try. I do have sound on all tvs if I use the
antenna but if I use the HDMI no sound. Any suggestions????
Than you

[luvlabs]

Do you have HDMI connections to your TVs or the component cables (3 + 2) cabling?

If you have the component cabling, you need to make sure the correct Red cable is plugged into the audio channels and the Red/White cables are plugged into the TV. HDMI transmits sounding picture over a single cable. In either case, you need to locate the splitters (passenger side, first bay, ceiling of bay) and reboot that.

[FreedomDream]

luvlabs is correct. Most satellite dish receivers are set up to work off of the "component" wiring. (I recently had the Direct service guy out on a problem and he wanted to change my set up from HDMI to component. But HDMI gives me a far superior picture.). If the audio jack is plugged in correctly, you won't get any sound.