Originally Posted by Tahoejeep
Iím looking for the location of the slide controller on our Ď03 Bus. Slide wonít extend. Have power past the engine run relay and the two breakers. But canít find the controller.
so I guess your Fuse is good (located in storage compartment beneath slide). If you have a voltmeter you can ck if your slide motor is getting any juice.
Some rigs have the distribution panel under the fridge.
As you can see I'm just brainstorming here. lol. Bear with me.
You have a Freightliner chassis, so on some, the Controller is on the ceiling in the storage compartment right under the slide itself. It's a 3x5 or 4x6 black box with a White label with a bunch of writing on it.
Mine is situated All the way in the back. Last compartment on driver side, near the Engine Battery bay. If you have 2 bays back there, it should be in the bay Next to the battery bay. They are usually attached to the wall, on the back wall or the side.
But it could be that your battery bay is on the passanger side, all the way in the back. Last Portal.
So if your Relays, breakers and motor are good, It may be the controller, that'll run you $200-330 dollars. Freight will be around $20 and you should get it in about 4-5 days.
I just changed mine out. Easy peasy. It only took 45 min's because I had to work around all the wiring. If you install it yourself, be careful, those wires are live. If you choose to disconnect them put tape on the end of the wires