Lot a mildew by dr side slide out front wall. Ripped out carpet and installed peel and stick.
I double sticky taped 1/8 hard board then liquid nailed another layer staggering the joints. That brought it leval with the black tradition plastic edeging. I then used 48 x 7 inch peel and stick laminate 1/16 thick..
I positioned the pieces along the edge so it overhung the plastic underneath by 2 ". I did not peel the backing off those 2 " so it will not stick to the ceramic floor. The next piece beside it will cover the black plastic edging enough so it will stick to it as it is not flat.
I could not make a proper border as the transition was more important to me. Seems to be a nice even trans. Though.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!