 |
05-05-2022, 08:51 PM
|
#1
|
|
Junior Member
Join Date: Feb 2021
Posts: 2
|
Slide Out
Where is the duel motor sync. velocity slide controller located ?
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
05-05-2022, 09:39 PM
|
#2
|
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Jun 2016
Location: Odessa, Tx.
Posts: 816
|
It would be helpful if you told everyone what make model and year you are working on.
|
|
|
|
|
05-08-2022, 08:05 PM
|
#3
|
|
Senior Member
Join Date: Nov 2013
Posts: 523
|
Quote:
Originally Posted by mikefuhrmann
Where is the duel motor sync. velocity slide controller located ?
|
There's nowhere near enough information here to help you.
__________________
Full -Time On The Road
2008 Tiffin Allegro Open Road 35QBA
6.7L Cummins ISB Tuned to 300HP
|
|
|
|
|
05-08-2022, 08:12 PM
|
#4
|
|
Community Administrator
Tiffin Owners Club
Join Date: Sep 2013
Location: DFW, Texas
Posts: 19,532
|
If you are referring to the Schwintek slide controllers, they are located in the second to last compartment on the passenger side in most coaches. They are usually mounted high up on the back wall of the compartment.
__________________
 2017 Phaeton 40IH XSH Maroon Coral - Power Glide Chassis with IFS
Previous '15 Tiffin Allegro RED 38QRA and '06 Itasca Sunrise 35A
'16 Jeep JKU Wrangler Sahara or '08 Honda Goldwing
|
|
|
|
|
05-08-2022, 08:17 PM
|
#5
|
|
Senior Member
Tiffin Owners Club Texas Boomers Club
Join Date: Feb 2018
Location: North Texas
Posts: 1,861
|
On my 2014 Allegro Bus, it is in the 4th, from the rear, PS basement compartment. 
__________________
2014 Tiffin Allegro Bus 37AP
|
|
|
|
|
05-09-2022, 07:29 AM
|
#6
|
|
Junior Member
Join Date: Feb 2021
Posts: 2
|
Quote:
Originally Posted by mikefuhrmann
Where is the duel motor sync. velocity slide controller located ?
|
I have a 2011 Tiffin 38QBA
|
|
|
|
|
05-17-2022, 07:58 PM
|
#7
|
|
Junior Member
Tiffin Owners Club
Join Date: Dec 2015
Posts: 4
|
Second lower outside cabinet on passenger side, facing cabinet, upper righthand side.
|
|
|
|
|
05-18-2022, 09:26 AM
|
#8
|
|
Member
Join Date: Feb 2018
Location: MN
Posts: 34
|
Slides on 2011 Tiffin 38QBA
We have a 2012 Tiffin RED QSA. There are no dual motor slides on our unit. Both passenger side slides are hydraulic powered by the HWH jack system. The 2 drivers slides are powered by single electric motors.
To my knowledge, all dual motor units are made by Schwintek. If you see geared tracks on the outside side of your slide(s) then you have Schwintek. If not there is no motor sync controller.
Brian O
|
|
|
|
|
05-19-2022, 06:00 AM
|
#9
|
|
Senior Member
Tiffin Owners Club Texas Boomers Club
Join Date: Feb 2018
Location: North Texas
Posts: 1,861
|
Quote:
Originally Posted by Brian O
We have a 2012 Tiffin RED QSA. There are no dual motor slides on our unit. Both passenger side slides are hydraulic powered by the HWH jack system. The 2 drivers slides are powered by single electric motors.
To my knowledge, all dual motor units are made by Schwintek. If you see geared tracks on the outside side of your slide(s) then you have Schwintek. If not there is no motor sync controller.
Brian O
|
I interpreted that as one motor on each side = dual motors.
__________________
2014 Tiffin Allegro Bus 37AP
|
|
|
|
|
05-20-2022, 07:59 AM
|
#10
|
|
Member
Join Date: Feb 2018
Location: MN
Posts: 34
|
Slide Out Motors
DRM901
You or correct, there is only a single motor per slide on our rig. Having 2 motors does not make it a "dual motor" slide system.
The Schwintek system used 2 motors per slide, one on each side of the slide. These motors are built into the coaches walls and require synchronization with each other to operate correctly. They are referred to as "dual motor" slides.
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 09:20 PM.
