Step not working

[Randy Stelck]

We have a 1999 Allegro bay steps just stopped working i replaced with new motor still nothing going on the internet alot of folks say there may be two fuses on these steps (kwikee series 32) I can only find 1 in the dash fuse box.The light on the step still works so i know there power there . Also does the magnet on the screen door ever go bad .The toggle switch is good .any help would be AWESOME Thank you very much

[Ray,IN]

Electric steps start/stop by sensing ampere draw. If you haven't lubricated the steps recently, do so; they may be binding and the controller cannot overcome the resistance amperage. It can't hurt anything since Kwikee says to lube them monthly anyway.

[luvlabs]

Check your door switch. Your model probably has a magnetic switch on the latch side of the door. You can test it with a strong magnet. If you don't have one, check the hinge side of the door for a push button style switch.