New Allegro Red - Where to put the front license Plate?

[rcsauce]

Hi

We just received our license plates and in NJ we need to have a front license plate but there is no place to put them. Any thoughts?

Thanks
Rob

[dizcom]

Used something like this on our last coach:


https://a.co/d/e12UmjF


And something like this on our Mustang:


https://ccmustangbrackets.com/produc...mustang-mach-e

[Flyer15015]

Real low in the center.
Just drill 2 holes.
No need for a fancy plate holder.

That's what I did.

Mike in Colorado

[Coarsegold]

Maybe behind the grill so it can be sort of seen or up on the dash down low. Can just check for rear clearance on front bumper facia area and bolt it down.

[ernieh]

Generally, they are mounted low on the generator slide out. Just find a picture of a for sale coach with a front plate. The nylon inserts for the mounting screws are available at any good auto parts store

[garykk]

That’s odd, Tiffins usually come with the bolts already in the front bumper. They are painted over when the MH is painted.
Edit…I just looked at a new Allegro Red picture on line and it clearly shows a mounting plate for the front license plate on the genset slide out.

[KenZ71]

I never put a plate on the front of my vehicles. Drive responsibly and no issues.

If the holes are already there I would put something silly. Not the state issue.

[palehorse89]

Originally Posted by KenZ71

I never put a plate on the front of my vehicles. Drive responsibly and no issues.

If the holes are already there I would put something silly. Not the state issue.

Why would you put something silly in place of whats required by the state's law.........

[rcsauce]

Thanks for all the responses. Unfortunately there is no real grill, the generator is in the front. (Diesel pusher) In the lower middle of the front "bumper" the cameras for active controls and braking is located.

NJ requires a front plate. Is there something that I can hang, without screws, off of the seam for the generator pull out?

Thanks
Rob

[intercept]

On my red I used a weather tech:

https://www.weathertech.com/platefra...BoCx0UQAvD_BwE

and used SS 1/4 20 bolts to mount it onto the generator cover on the front at the same height as the rear plate.

There are less expensive ones on amazon.

Jack

[JBL]

Just call Tiffin and have them send one because NJ required it.

[HerbieHauler]

I think the problem is, where the bolt are normally on the RED, with the upgrade camera in the front, It takes the place of the license plate location.. You will probable need to mount the plate to the left or right of the camera which sits dead center on the generator pull out.. Either way you do it, It will look bad unless you just stick it in the front windshield..

[Flyer15015]

Hang it with a short chain from the bottom lip.
Old hot Rod style.

Mike in Colorado