I have a 2004 Fleetwood Flair. When I am plugged in to shore power all 12v systems are ok. When I unplug I have no 12v power. I have two house batteries that are less than a year old. When I start the engine I regain my 12v power. I checked all breakers and fuses on the inside and all are OK. I looked in the box under the hood and all appear to be OK. I do not see any breakers in this box. Any ideas? PS - the switches on my wall panel that are supposed to disconnect the batteries when stored quit working about two years ago. I have not been able to find the correct switch to replace them. Now I just disconnect my batteries if the coach is not plugged in. However, I have not had a 12v power problem until now.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
It's not your converter. With the engine running, the BIRD is feeding the 12 VDC systems. With 120VAC shore power, the converter is supplying the 12 VDC. Find and replace the disconnect relay, or replace the fuse for it. Good Luck!
__________________
2013 Newmar Essex 4544
69' Camaro in tow
Linear Mode
