Looking to do some resealing on the roof and was wondering what it was made of. Rear section is fiberglass and the paint has worn off under the Spoiler? down to the fiberglass. That part I can tell but what about the rest of it? Fiberglass or Rubber? Thanks
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Post a picture of your roof. In your other post with the trim question it looks like you have a fiberglass roof ... my eagle is a 1997 and it is fiberglass and it looks like your trim picture from the side view.
took a little bit to get back to it(honey does and racecar). Here is some pictures of the roof. Don't look bad except the front and rear caps needing painted or sealed. Any opinions on shape would be appreciated. Thanks
That's fiberglass. Easy to maintain. Clean it really good, remove any questionable sealant and reseal. Use exploding rivets on your drip rail wherever there are questionable looking rivets ... I would dip the rivets in sealent before inserting them with your rivet tool. Also put sealant behind the drip rail before you pull everything together with new rivet. You can also paint the roof. I'm from the boating world and would use a quality marine paint available at most good marine stores. Prep it and use a roller on the non skid portion of your roof which is 90% of it.
Hope this helps!