Bounder: 1999 Bounder Switch Question

[dwvaughn]

Hi,

I've got a 1999 Fleetwood Bounder 36S. I made the mistake of changing out the switches by the door and NOT remember where each wire went. I'm wondering if someone can help me identify which wire goes where.

From left to right in the photo I have Porch Light, Entry Step, Some Indicator (assuming Entry Step), Luggage Light, and Inside Light.

As for wires I have the following unconnected:
Blue: 132 STP SW
175 STP IND
White: 175 LUG LT
132 STP SW
132 STP SW
ENTRY SW
Black: 2 Unlabeled

https://photos.app.goo.gl/XGGINgMYXJ0WXfut1

https://photos.app.goo.gl/Lat7jXL8kHef0Jkk1

[WILDEBILL308]

Originally Posted by dwvaughn

Hi,

I've got a 1999 Fleetwood Bounder 36S. I made the mistake of changing out the switches by the door and NOT remember where each wire went. I'm wondering if someone can help me identify which wire goes where.

From left to right in the photo I have Porch Light, Entry Step, Some Indicator (assuming Entry Step), Luggage Light, and Inside Light.

As for wires I have the following unconnected:
Blue: 132 STP SW
175 STP IND
White: 175 LUG LT
132 STP SW
132 STP SW
ENTRY SW
Black: 2 Unlabeled

https://photos.app.goo.gl/XGGINgMYXJ0WXfut1

https://photos.app.goo.gl/Lat7jXL8kHef0Jkk1

I would contact REV Group with my vin number and see if they have a wiring diagram. I know you don't want to hear it but this is why it is a good idea to take pictures with you phone before pulling things apart.
Bill

[FCoover]

Originally Posted by dwvaughn

Hi,

I've got a 1999 Fleetwood Bounder 36S. I made the mistake of changing out the switches by the door and NOT remember where each wire went. I'm wondering if someone can help me identify which wire goes where.

From left to right in the photo I have Porch Light, Entry Step, Some Indicator (assuming Entry Step), Luggage Light, and Inside Light.

As for wires I have the following unconnected:
Blue: 132 STP SW
175 STP IND
White: 175 LUG LT
132 STP SW
132 STP SW
ENTRY SW
Black: 2 Unlabeled

https://photos.app.goo.gl/XGGINgMYXJ0WXfut1

https://photos.app.goo.gl/Lat7jXL8kHef0Jkk1

My thoughts:

You have 5 switches- mine has 4.

I’m assuming that you have 2 switches that relate to the Kwikee steps - one for the steps themselves and one for the under step light.

Are your LUGGAGE light and Entry STEP switches illuminated? Do they have a small rectangular light on the switch face? If so, they should have 3 lugs - third lug is for a black ground

Blue:

132 STP SW- attach to ENTRY STEP switch
175 STP IND - attach to ENTRY STEP switch

White:

175 LUG LT - attach to LUGGAGE LIGHT switch

132 STP SW - attach to 2nd ENTRY STEP switch
132 STP SW - attach to 2nd ENTRY STEP switch
ENTRY SW- attach to LIGHT switch
Black-1- ground - attach to 3rd lug of illuminated ENTRY step switch
Black- 2- ground - attach to other illuminated LUGGAGE light switch

I hope that this helps.

[dwvaughn]

Bill, I did call Rev and unfortunately what they sent wasn't very helpful. Just a 50,000' view of where wires go (sort of). And I thought I had taken a photo but it wasn't on my phone for whatever reason. :-/ Lesson learned, double check it saved the photo first.

Fcoover, so I have a step switch then just an indicator light to the right of that then yes a three lug lighted luggage light switch next to that. I'll give what you sent a shot.

[WILDEBILL308]

Try joining this Bounder group. Some one may have the wiring diagram you need.
https://groups.yahoo.com/neo/groups/bounder/info
Bill

[dwvaughn]

Thanks Bill. Just sent my invite request. Odd thing about it, I checked and only Lug LT has power on it.