Bounder: 2003 Fleetwood Bounder 35. slide-out no power?

[supremacy28]

Hi

I have 2003 Fleetwood Bounder 35 RV. Slide-out has no power, will not out or in at all. Im gonna make lists what I went though tested pass or fail

1) Motor- passed
2) control board (new)- passed
3) fuse at the electronic power center *20a*- passed
4) switch (new)- passed
5) brake- passed
6) leveler jack- passed
7) volts reading range between 12.68-12.97- passed
8) Dual batteries (deep cycle) passed
9) The wiring to the motor has no volt, meter reading show 0.00- failed

any idea why there is no 12v feed though the slide-out motor? Both bedroom and living room slide-out has no power to the motor. I have been look though everything. Seems everything fine but why getting no power to the slide-out motor?

Any idea? Any suggest?

I thank you for reading my message and looking forward hear from you and solve the problem with slide-out before my travel begin for whole summer.

[CLIFFTALL]

Originally Posted by supremacy28

Hi

I have 2003 Fleetwood Bounder 35 RV. Slide-out has no power, will not out or in at all. Im gonna make lists what I went though tested pass or fail

1) Motor- passed
2) control board (new)- passed
3) fuse at the electronic power center *20a*- passed
4) switch (new)- passed
5) brake- passed
6) leveler jack- passed
7) volts reading range between 12.68-12.97- passed
8) Dual batteries (deep cycle) passed
9) The wiring to the motor has no volt, meter reading show 0.00- failed

any idea why there is no 12v feed though the slide-out motor? Both bedroom and living room slide-out has no power to the motor. I have been look though everything. Seems everything fine but why getting no power to the slide-out motor?

Any idea? Any suggest?

I thank you for reading my message and looking forward hear from you and solve the problem with slide-out before my travel begin for whole summer.

Welcome to IRV 2. If its a Power Gear Motor , they have great customer service via email and they are quick to respond. Their address is. info@powergearus.com .

Hope this helps. Good luck and let us know how you make out.

[Clayobx]

obviously you are running your engine while operating your slides? Have you checked the ground wiring to the motors?

[Ridgmar]

I think he meant you are NOT running your engine while putting out slides