Community Forums

Agility57 · 05-31-2018, 09:48 AM

All,

My question is about my 2004 Fleetwood Southwind.

Anybody know how or what points to lubricate on the bedroom slide? There are many open contact points to lubricate on the main room slide which I have been able to spray on the specialized dry lube for slides, but cannot find a way to get to any of the contact points for the bedroom. Do I have to remove the bed, box and all?

Anybody found a way to do the preventive maintenance on the bedroom slide?

**NLOVNIT** · 05-31-2018, 09:44 PM

If your SW is similar to our Bounder, there is an access hatch under the bed. You don't have to remove the bed, but even with it up on the struts, it's a tight fit getting under there.

Lori-

Agility57 · 06-01-2018, 09:29 AM

Quote:

Originally Posted by NLOVNIT

If your SW is similar to our Bounder, there is an access hatch under the bed. You don't have to remove the bed, but even with it up on the struts, it's a tight fit getting under there.

Lori-

I don't recall seeing a panel under there, it is all lined with a carpet type material. I will look a little closer this weekend.

**NLOVNIT** · 06-01-2018, 09:12 PM

Ours is covered in carpet too. Look towards where the headboard is. There's a panel there.

Lori-

**CLIFFTALL** · 06-02-2018, 04:33 AM

Same as Lori on my 08 35E Bounder.
Here’s a link to the manual which shows where it is and how to lubricate it.
https://www.lci1.com/assets/content/...2_S0010_01.pdf

Agility57 · 06-03-2018, 04:25 AM

Quote:

Originally Posted by Clifftall

Same as Lori on my 08 35E Bounder.
Here’s a link to the manual which shows where it is and how to lubricate it.
https://www.lci1.com/assets/content/...2_S0010_01.pdf

Thank you for the link!

Thanks all for the additional information.

Jeff.