Bounder: 2013 Fleetwood Bounder 35K Camco Black 44461 Gen-Turi Generator Exhaust System

[PURALIFE]

Hello, has anyone outfitted your coach with the Camco Black 44461 Gen-Turi Generator Exhaust System?
If so, how easy was it to install on a 2013 Bounder 35k, 5500 Onan generator?

thanks - Tortuga Grande

[890ken]

Not a Bounder, but I have the GenTuri on my Onan 5500 in my Mountain Aire gasser. Was really easy to install. The basic kit comes with 2 metal attachment points that you are supposed to stick to the side of your MH for the rubber straps that hold the Genturi in place. I felt that they were unsightly so I bought https://www.amazon.com/Camco-44850-G...gateway&sr=8-1 instead. they have worked fine for 4 years now.

[Jimg]

I have installed my Genturi on three rv's.

The original has small brackets that screw into the sidewall to support the exhaust, but there are small suction cups at Camping World that stick to the RV and can be removed.

I had to retrofit mine to go under a slideout by getting an extention from and auto parts store. No problems.

I mount the exhaust tube to the genset by drilling a hole in the pipes when attached and putting a pin through it. With the pin and suction cups it can be mounted in a minute.