30" x 24" Exit window

[Radicaltimes]

Emergency exit window got busted. Can't find a 30 x 24 anywhere. Revco doesn't even carry that size. Not a standard size. Found sliders that size. Any ideas on where to get a replacement?

[NLOVNIT]

Please tell us year/make/model of your RV. We need that info to help you.

When you get a chance, please put that info in a signature to your posts so that will show on every post you make.

[US1]

Call FW with your VIN number. (unless this is an older RV to which they may not have the build sheets on anymore) They can look up your window but can only sell as a complete unit. I broke my Emergency glass last yr while cleaning it. I was able to just buy the glass panel directly from Hehr. Has the latch and hinges preinstalled. See if you have that name etched on the glass. You will need the 20 or so digit number off the window frame sticker to do so. They can not and will not help you without that. Just a tid bit of learned info.
There is nothing special about the window sizes. There are just so many variables that a simple width and height isn’t enough info to look up for the exact replace.

Or look online for complete window replacements by another manufacture with your dim for a close match.
Or try an RV salvage yard to inquire if they have the same RV as you.

[Radicaltimes]

Originally Posted by NLOVNIT

Please tell us year/make/model of your RV. We need that info to help you.

When you get a chance, please put that info in a signature to your posts so that will show on every post you make.

I have it in profile. Don't know how to edit post. 2007 Fleetwood Fiesta LX 31 M

[Radicaltimes]

Originally Posted by US1

Call FW with your VIN number. (unless this is an older RV to which they may not have the build sheets on anymore) They can look up your window but can only sell as a complete unit. I broke my Emergency glass last yr while cleaning it. I was able to just buy the glass panel directly from Hehr. Has the latch and hinges preinstalled. See if you have that name etched on the glass. You will need the 20 or so digit number off the window frame sticker to do so. They can not and will not help you without that. Just a tid bit of learned info.
There is nothing special about the window sizes. There are just so many variables that a simple width and height isn’t enough info to look up for the exact replace.

Or look online for complete window replacements by another manufacture with your dim for a close match.
Or try an RV salvage yard to inquire if they have the same RV as you.

Thanks. Sent Libbert a email with the numbers on window frame. They bought out Hehr.

[95f5334j]

Your build sheet is available to download from the REV website using your VIN or FIN. The build sheet will have part numbers for all components. If the part number is obsolete there will likely be a replacement part number


Look here https://revrvparts.com/catalog-center

[Gary RVRoamer]

If just the glass is broken, remove the window and take it to a glass shop to be repaired.

[US1]

Originally Posted by Radicaltimes

Thanks. Sent Libbert a email with the numbers on window frame. They bought out Hehr.

I did not deal with Lippert. I ‘think’ it was the link below I ordered from. Been a yr and I’m
not sure. With the numbers off the window frame. As a backup if Lippert can’t help, contact FW parts and ask for the actual part number from the window manufacture itself, not FWs part number. I had to go that route as the sticker on mine was illegible for 1/2 the numbers. Good luck
https://parkin-acc.com/parkin-access...ows-and-parts/

[jaearhart]

I suggest watching a you tube video on iremoving and replacing Flush Mount windows. The Exit Window 8s easy because of the latch mechanism. I called REV parts for the proper ŕeplacement . I kept the frame . Maybe if it happens again ill take that to a local glass dealer .

[GunnerAZ]

Originally Posted by Radicaltimes

Emergency exit window got busted. Can't find a 30 x 24 anywhere. Revco doesn't even carry that size. Not a standard size. Found sliders that size. Any ideas on where to get a replacement?

If you are in AZ I can recommend a glass company that works out of Phoenix. Good luck.