39 V Locking arms on full wall slide not working after retracting slide. Suggestions

[jasonracing]

After retracting the wall slide on our 06 Providence 39V today to head for home the locking arms on the wall slide wouldn't extend to help lock and secure the wall slide. I tried extending the slide again and retracting it with no change in the results the locking arms wouldn't extend. Has anyone else had this problem on a V chassis? Any suggestions on how to get information about this type of Floorplan?

Sent from my SM-S975L using iRV2 - RV Forum mobile app

[Fiesta48]

If both slide locks are not functioning, there is a common problem. Your going to have to get schematics from Fleetwood and electrical help. Try a mobile RV mechanic.

Sent from my SCH-I545 using iRV2 - RV Forum mobile app

[Tha_Rooster]

Make sure there is nothing keeping it from closing fully. The full wall slide motors count revolutions that’s how it knows how far to go out or in. Call AC hopefully they can walk thru and you want need a teach pendant to repair.

[jasonracing]

Originally Posted by Tha_Rooster

Make sure there is nothing keeping it from closing fully. The full wall slide motors count revolutions that’s how it knows how far to go out or in. Call AC hopefully they can walk thru and you want need a teach pendant to repair.

Thanks for your response! Who are you talking about calling AC?

Sent from my SM-S975L using iRV2 - RV Forum mobile app

[jasonracing]

Originally Posted by Fiesta48

If both slide locks are not functioning, there is a common problem. Your going to have to get schematics from Fleetwood and electrical help. Try a mobile RV mechanic.

Sent from my SCH-I545 using iRV2 - RV Forum mobile app

Thanks for your response! I'll see if I can track down a wiring diagram and do some troubleshooting. I'm thinking it might be something as simple as a relay or maybe even a drive motor or something similar that drives the lock arms.

Sent from my SM-S975L using iRV2 - RV Forum mobile app