By chance, does anybody happen to know how the wires are run to the 5 amber marker lights on the front cap of a 2003 American Tradition? I'm trying to replace my light assemblies but cannot get to the connections that feed each light because all the slack was taken out of the wires during assembly!! I would have thought they ran up to the cap via the columns on each side of the windshield but found this not to be. Any help would be appreciated....
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Thanks! there are many wires that run up the column on the drivers side but they are all identified as speaker wires. I removed the drivers side marker light and can clearly see where the wire runs "forward" but that's the extent of it! All I wish to do is find if there is any slack to be had. If I fail to find the wires, I'm thinking of cutting the pigtail that leaves the marker light and simply add another connector to that. I Hate to do a half baked job but at least it's a solution! Thanks for the help!