Bounder 35K - no turn or brake lights at trailer connection
With our CR-V ready to hook up to the Bounder I thought I would test the electrical cable before connecting it to the Honda to make sure all the wiring is as it should be. But I have an issue so I hesitate to connect the cable to the car.
At the 7-pin connector on the rear of the Bounder, with the key turn on and even once with the Bounder running, I was able to read 12 volts on the trailer charge line and the clearance/tail light pin. However there is no power whatsoever on the pins for either turn signal or brake lights (yellow and green wires). The brake lights and turn signals work just fine on the Bounder but not at the 7-pin connector. I can only guess right now that there must be two blown fuses, does anyone know where these two fuses might be?
Thanks in advance,
Damon and David
2014 Fleetwood Bounder 35K, F53
2005 Honda CR-V, Blue Ox Base Plate, Tow Bar, Patriot Brake