American Coach: Coach Control Center Re-Org

[Grizzly73]

Updating my Control Center as below (Old-Top, New-Bottom) - any suggestions before I commit to plywood?

BTW, the satellite is going and the control for the driver floor is going to the dash. The slide controls are being moved into the cabinet. The two round displays are Victron Battery & Solar monitors.

Shawn

[Grizzly73]

I've got this...

[Grizzly73]

1. Board cut to size, mounted on hinge and being test fit.
2. Cad printouts trimmed and taped together.
3. Template taped to new panel.
4. All holes center-punched and transferred to panel.
5. Cut lines marked.
6. Taped and ready for the jigsaw...

[Grizzly73]

Panel cut out and painted, working on the wiring, and the final panel, minus the new Battery & MPPT Monitors.

While the paint didn't turn out like I'd have hoped, overall I am very happy with the way it turned out and the new layout.

Shawn

[Grizzly73]

Until I get the round items installed, I 3D printed hole fillers and temporarily mounted the floor switch on the lowest one. This upgrade is done for now and I am really happy with how it turned out.

Oh, and I vacuumed the bottom after I took the picture

Shawn