Discovery: Dash Panel Screws

[The Goose]

I have a 2007 Fleeetwood Discovery 40X. My gauges all stopped working except for the air pressure. Fleetwood help desk advised I needed to replace the wiring harnesses behind the panel, Service Solution is 3714. I received the wiring harnesses today but I'm having trouble removing the dash panel. The screws appear to be Torx but none of the wrenches I have fit. The screws appear to be between a T15 and T20. Does anyone know what type screws they are? Thanks

[krivanj]

On my 2005 Fleetwood Revolution they are small Allen screws. SAE, not metric, but one size fits exact.

[ezturf]

Use a number 2 square drive bit.

[ga traveler]

Originally Posted by The Goose

I have a 2007 Fleeetwood Discovery 40X. My gauges all stopped working except for the air pressure. Fleetwood help desk advised I needed to replace the wiring harnesses behind the panel, Service Solution is 3714. I received the wiring harnesses today but I'm having trouble removing the dash panel. The screws appear to be Torx but none of the wrenches I have fit. The screws appear to be between a T15 and T20. Does anyone know what type screws they are? Thanks

When you get the dash open, I would check the grounds before changing the harness. It will only take a few minutes to loosen and clean the grounds.

[95f5334j]

Originally Posted by ga traveler

When you get the dash open, I would check the grounds before changing the harness. It will only take a few minutes to loosen and clean the grounds.

This is a known Freightliner issue, the fix is replacing the original white wires for the new black wires.

Remove the dash screws with a #2 Robertson (square drive)